INTURN 320 Contour CNC draaimachine

| INTOS Zebrak

INTURN 320 Contour CNC draaimachine

Merk : Intos
Type : INTURN 320 Contour

Ø 320 mm, l = 1000 mm

Productomschrijving

DESCRIPTION:

The headstock is a weldment, the rigid box-based construction considerably increases the stability of the cutting process
The spindle is mounted in precise, grease-lubricated antifriction bearings. The revolutions-feed interdependence is ensured by means of an encoder located off the spindle axis, the transmission takes place via an indented belt
Spindle drive is continuous, without gear shifting. The spindle is driven by the digital regulation motor HEIDENHAIN QAN200L 7,5 kW. For moment transmission a MULTI V belt with the constant ratio of 2,25 is used
Longitudinal and cross feed takes place by means of a ball screw with prestressed ball nut; for drive, regulation digital motors HEIDENHAIN QSY 96 G are used. Both axes are measured by rotary sensing units located on the feed motor
The bed is a grey iron casting, the guide surfaces are hardened HB>380 and adapted to guide the longitudinal slide and the tailstock
The longitudinal and cross slides are grey iron castings, the guide surfaces are lined with TURCITE, the cross slide is designed to use a tool system with exchangeable quick clamp and a NC-controlled 8 position revolving turret
The tailstock is also a grey iron casting, tailstock feeding and tailstock barrel removing is done by hand
Central lubrication of guide surfaces
The machine is fully encased, the guards slide to side, the closed guard is secured with a safety lock
The control panel with integrated screen is located on a knee in the left part of the machine

MACHINE APPLICATION:

The general-purpose center lathe INTURN 320 CONTOUR is designed to carry out all turning operation in the production process. The up-to-date CNC system HEIDENHAIN MANUAL plus 4110 makes its operation quite easy for the operator without special training in programming work owing to the interactive operator- control system dialogue. Introduction of complex geometry operations is particularly easy.

STANDARD EQUIPMENT:

Standard tool set
Complete machine guards with safety elements
Central lubrication
Working space light
Constant speed turning

OPTIONAL EXTRAS:

NC-controlled revolving turret with horizontal axis, type SAUTER-8 tools
Three-jaw chuck
Four-jaw chuck
Three-jaw chuck DURO
Live tailstock center MORSE 3
Spindle driver center MORSE 3
Tool block with exchangeable quick clamp for one tool
Four position tool head PARAT

MACHINE SPECIFICATIONS:

WORKING RANGE
Swing over bed	mm	320 (200 Sauter)
Swing over carriage	mm	155
Distance between centers	mm	1000
Maximum weight of work piece in centers	kg	80
SPINDLE
Spindle speed (continuous)	1/min	10 - 4000
End of spindle	DIN	55029 S 5 Camlock
Output		M5
Bore	mm	40
Output	kW	7,5
Max. spindle moment	Nm	108
type of motor		QAN200L
Max. speed of motor	1/min	9000
Motor-headstock transmission ratio		2,25
CARRIAGE
Working feed Z (longitudinal)	mm/min	0 - 8000
Rapid traverse Y	mm/min	10000
Type of motor		QSY 96 G
Ball screw Z	mm	32x5
Transmission ratio		1.47
Max. speed of motor	1/min	2900
Feed force	N	5000
Working feed X (cross)	mm/min	0 - 8000
Rapid traverse X	mm/min	10000
Type of motor		QSY 96 G
Ball screw X	mm	20x40
Transmission ratio		1
Max. speed of motor	1/min	2500
Feeding force	N	4000
TAIL-STOCK
Tail-stock sleeve diameter	mm	50
Taper of the centre		M3
Tail-stock sleeve travel	mm	150
MACHINE
Total input required	kVA	10
Dimensions
Length	mm	2320
Width	mm	1450
Height	mm	1380
Weight	kg	1500
Control system	HEIDENHAIN	MANUAL plus 4110